uxcell Power Tool Kits Price History
-
₹985 *Lowest Price₹985Highest Price₹131,274- Round Metal Rods: Diameter: 1.2mm / 0.05" (+/-0.05mm / 0.002"); length: 100mm / 3.93" (+/-5mm / 0.2"). High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
-
₹139,383 *Lowest Price₹139,383Highest Price₹180,341- Price dropped 0% (₹4 reduction) in Amazon this week
- The lowest price until last week was ₹139,387
- [Feature]: Color: Silver Tone; Material: HSS (High Speed Steel); Hardness HRC: 63-65; Diameter: 0.5mm/ 0.02inch; Length: 60mm/ 2.36inch; Diameter Accuracy: -0/-0.01mm
- [Easy to Cut]: Round bars are easy to cut and can be cut to your own needs and formed into any size you want. Can be drilled, cut, heated, and shaped.
- [Smooth Rod]: The round bar has a smooth surface, and the steel has good hardness, is easy to shape without cracks. Round steel bars are sturdy and durable.
- [Versatile Steel Rods]: It is widely used for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items.
- [Application]: These round steel rods are suitable for gear shafts, motor shafts, short support shafts, shaft pocket models, miniature axle, and can be applied for various shaft DIY model planes, model ships, model cars, and more.
-
₹329,516 * ₹527,22638% OffLowest Price₹2,893Highest Price₹329,516- Specifications: Cutting dia.: 5.6mm / 0.22",5.7mm / 0.22"; tool flute length: 20mm / 0.79",19mm / 0.75"; overall length: 90mm / 3.54"; accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers
-
₹115,475 *Lowest Price₹108,134Highest Price₹115,475
- [Size] - Shank Diameter: 1/8", Head Diameter: 12mm / 0.47 inch, Total Length: 42mm / 1.65 inch.
- [Details] - Grinding Bit Material: White Corundum, Shape: Ball, Mesh: 80 Grit, Recommended Speed: 25-40m/s. The ball shape is suitable for surface and edge grinding.
- [Material] - White corundum has a higher hardness than brown corundum. The particle size is easily broken, the edges and corners are sharp, good self-sharpening, strong grinding force, high efficiency, and high-temperature resistance.
- [Applications] - Suitable for grinding of hardened steel, high carbon steel, general high-speed steel, alloy steel, etc. cutting tools and workpieces, precision grinding of measuring tools and instrument parts, and also suitable for form grinding.
- [Notice] - The new corundum grinding bit should be tried at a low speed before use. If there is a jumping problem, do not continue to use it. Flying chips may be generated during use. Please use jigs, non-slip finger stall, and wear protective glasses when using this corundum grinding bit.
-
₹140,015 *Lowest Price₹140,015Highest Price₹140,049
-
₹150,056 *Lowest Price₹148,596Highest Price₹150,056
- Round Metal Rods: Diameter: 7mm / 0.276"; length: 100mm / 3.94"; hardness: HRC61~63; finish: polished. High-speed steel rod is with combination of hardness and toughness for wear resistance.
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed.
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs.
-
₹162,593 *Lowest Price₹162,593Highest Price₹204,926
- Price dropped 0% (₹3 reduction) in Amazon this week
- The lowest price until last week was ₹162,596
- Specifications: Diameter: 2mm / 0.08"; length: 200mm / 7.87". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
-
₹1,185 *Lowest Price₹1,185Highest Price₹156,489
- Price dropped 99% (₹115345 reduction) in Amazon this week
- The lowest price until last week was ₹116,530
-
₹164,087 *Lowest Price₹164,087Highest Price₹164,087
-
₹288,503 *Lowest Price₹288,503Highest Price₹288,505
-
₹186,838 *Lowest Price₹186,838Highest Price₹235,340
- Specifications: Diameter: 8mm / 0.31"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63. Solid round bar is full hard through the core. Small rod diameter may bend slightly during shipping.
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- SHARE
Check History Charts by Power Tool Kits Prices
Please send us your feedback or suggestions
* Product prices and availability are accurate as of the date/time indicated on the product page and are subject to change. Any price and availability information displayed on the store (Amazon, Flipkart, etc) at the time of purchase will apply to the purchase of displayed products.
* As an Affiliate, we earn from qualifying purchases at no extra cost to you. More info.
