Sander Machines Price History
Price Dropped Sander Machines
- BRAND:
-
₹4,899 * ₹10,38053% OffLowest Price₹3,869Highest Price₹5,059- ⚡ 900W MOTOR FOR WALLS AND CEILINGS — This wall putty sander has a 900W motor that keeps the 180mm pad turning when you press it against putty, POP or plaster, instead of stalling and leaving patchy marks. Drywall sanding is a large-area job, and a weak motor is what turns a one-day room into a three-day one. Enough power to work through a full wall of fresh putty without stopping, and enough headroom that the motor runs cooler over a long working day.
- 🔃 1400-2700 RPM MULTILEVEL SPEED ADJUSTMENT — Variable speed: set the speed to the job. Low speed for soft fresh putty and delicate finishing coats, where too much speed digs into the surface; high speed for hardened plaster, old paint and rough patches that need real material taken off. Being able to choose is what lets one machine handle both first-coat levelling and the final smooth finish before painting, without changing tools.
- 💨 VACUUM DUST EXTRACTION — A drywall sander with vacuum: the pad is connected to suction that pulls dust away through the hose into the dust bag while you sand. Wall sanding is the dustiest job in any renovation: with suction, far less fine powder settles on floors, furniture and windows, and far less of it ends up in your eyes and lungs. Clean-up after the job takes minutes rather than an afternoon, and the wall stays visible while you work.
- 💡 BUILT-IN LED LIGHT ON THE HEAD — The LED light shines across the wall surface as you sand. Light across a wall shows up every ridge, dip and missed patch that overhead room lighting hides, so you can see exactly where to sand more and where the finish is already smooth. That means fewer surprises after the first coat of paint goes on, and less going back to redo areas that looked fine at the time.
- 📏 180MM (7 INCH) SANDING PAD — A large 180mm (7 inch) pad covers a wide area with every pass, which is what makes this a wall sander and ceiling sander rather than a small hand sander. The pad uses Velcro-type sandpaper, so changing the grit takes seconds: peel off the used sheet and press on a new one. Six sheets come in the box so you can start the job the day it arrives, with no special tools needed.
- 🔒 TRIGGER LOCK FOR CONTINUOUS OPERATION — Lock the switch on and the sander keeps running without you holding the trigger down. On a long wall or a ceiling, that is the difference between a sore hand after twenty minutes and a comfortable full day of work. Your grip stays on steering the head across the surface rather than squeezing a switch, which also gives a more even finish across the whole wall.
- 🔌 4 METRE CORD — RUNS ON ANY 230V SOCKET — Plugs into any ordinary 230V household socket, with steady power for as long as the job takes and no battery to run flat halfway up a wall. The 4 metre cord gives enough reach to cover a large section of wall or ceiling from one socket before you need to move. Power stays constant from the first minute to the last, so the speed you set is the speed you get.
- 🏠 FOR PAINTERS, CONTRACTORS AND HOME RENOVATION — Made for wall putty sanding, POP and gypsum board finishing, plaster smoothing and preparing walls and ceilings before painting. A wall sanding machine, putty sanding machine and POP sanding machine in one, for painters, interior and false-ceiling contractors, builders and home renovation work. It replaces hours of hand sanding with a sanding block, and gives a flatter, more even surface that shows in the final paint finish.
- 📦 IN THE BOX — T14692 drywall sander, 1 x dust bag, 1 x 2 metre hose pipe, 1 x handle and 6 x Velcro-type sandpaper sheets. Everything needed to start sanding with dust extraction straight out of the box, with nothing extra to buy before your first wall. Check the contents against this list when it arrives, and keep the carton until you have run the machine once.
- 🛡️ 6-MONTH WARRANTY WITH SERVICE IN INDIA — Covered against manufacturing defects for 6 months, with genuine spare parts and our own service team in India, Monday to Friday. If something goes wrong there is a number to call and a person who answers. Keep the invoice for any warranty claim. Tomahawk tools are designed for regular use on real job sites, and backed by a team that supports them after the sale.
- SHARE
Check History Charts by Sander Machines Prices
Please send us your feedback or suggestions
* Product prices and availability are accurate as of the date/time indicated on the product page and are subject to change. Any price and availability information displayed on the store (Amazon, Flipkart, etc) at the time of purchase will apply to the purchase of displayed products.
* As an Affiliate, we earn from qualifying purchases at no extra cost to you. More info.