Price History of
DEWALT DCG407N-B1 18V(20V MAX) 100mm (4") Cordless Brushless Slide Angle Grinder - BARE TOOL, 9000 RPM No Load Speed, SIDE HANDLE INCLUDED
Current Price*
₹12,139
Lowest Price
₹11,791
Highest Price
₹12,564
| Current Price* |
|
| MRP |
|
| Brand | |
| Shop Now |
Amazon Price History
Roll over the chart for price information
Current Price*
₹12,139
Lowest Price
₹11,791
Highest Price
₹12,564
- SHARE
Features
- Voltage: 18V (20V Max) | Battery Type: Li‑Ion | No Load Speed: 9000 RPM | Spindle Diameter: M10 | Spindle Length: 16mm | Weight: 1.61 kg | Grinding Wheel Diameter: 100mm | Grinding Wheel Thickness (Max): 6mm | Cutting Off Wheel Diameter: 100mm | Cutting Off Wheel Thickness (max): 3mm | ELECTRONIC BRAKE: No | Has features like KICKBACK PROTECTION, E-CLUTCH SYSTEM, SOFT START, OVER-LOAD PROTECT, DUST MESH, RUBBER MOLD BODY, ONE TOUCH GUARD.
- Package Contents: 1 Angle Grinder - Bare Tool, 1 Guard (Type B), 1 Side Handle, 1 Flange Set, 1 Wrench, 1 Instruction Manual, 1 Warranty Card.
- NO-VOLT SWITCH: The No‑volt function stops the grinder restarting without the switch being cycled if there is a break in the power supply. | ELECTRONIC CLUTCH: This unit is equipped with an E‑Clutch (Electronic Clutch), which in the event of a high‑load or wheel pinch, the unit will be shut off to reduce the reaction torque to the user. The switch needs to be cycled (turned on and off ) to restart tool..
- KICKBACK BRAKE: When a pinch, stall, or bind‑up event is sensed, the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off. The switch will need to be released then depressed to restart tool..
- Power‑OFF OVERLOAD PROTECTION: The power supply to the motor will be reduced in case of motor overload. With continued motor overload, the tool will shut off. The switch will need to be released then depressed to restart tool. The tool will power off each time the current load reaches the overload current value (motor burn‑up point). If continued overload shutdowns occur, apply less force/weight on the tool until the tool will function without the overload engaging. | SOFT START FEATURE: The soft start feature allows a slow speed build‑up to avoid an initial jerk when starting. This feature is particularly useful when working in confined spaces..
Price Dropped Power Angle Grinders
Check Price History
* Product prices and availability are accurate as of the date/time indicated on the product page and are subject to change. Any price and availability information displayed on the store (Amazon, Flipkart, etc) at the time of purchase will apply to the purchase of displayed products.
* As an Affiliate, we earn from qualifying purchases at no extra cost to you. More info.